DIG3D.LP.M+DIG-Z.M CNC 3D digitizing probe+Z axis TLS with magnetic connector

Description

Complete set of measurement devices with magnetic connector for your CNC router
Item containts:
-
DIG3D.LP.M
... 3axis digitizing touch probe, low profile, with magnetic connector
-
DIG-Z.M
... tool length sensor with magnetic connector
-
M2
and
M3 adapters
for standard ruby ball tips for DIG3D
-
spare short and long tips
for DIG3D
All sensors are on stock! Fast shipping, fast delivery!
If you are not sure about wiring to your motion control, just send me motion control type or a photo and I will let you know how to wire it and which type is suitable for you.
Watch the short video presentation
Main parameters
DIG3D.LP.M
:
tip diameter:
3mm
shaft diameter:
6mm
3mm is optional
, specify it during an ordering or write me the message
shaft length:
24
mm
power:
5-12V
/DC,
25mA max.
17-24V is optinal
, specify it during an ordering or write me the message
output:
NPN
(switch to GND)
/NC
(normally closed)
PNP and NO is optional
, specify it during an ordering or write me the message
cable length:
1m
Standard parameters are 6mm shaft dia, 5-12V power, NC - normally closed, NPN
.
If you need other variants, just specify it during an ordering or write me the message.
Spare tips (short and long) + M2 and M3 tip adapters:
Wiring:
Brown:
positive power supply
Black:
sensor output
Blue:
GND
Main parameters
DIG-Z.M
:
Sensor dimension:
58x26x25mm
Switching point:
approx.
24mm
from the bottom
power:
5-24V
/DC
, 25mA max.
LED indication:
white=ready, red=triggered
output:
NPN
(switch to GND)
/NC
(normally open)
PNP and NO is optional
, specify it during an ordering or write me the message
cable length:
1m
Standard parameters are 5-24V/NPN/NC
.
If you need other variants, just specify it during an ordering or write me the message.
Wiring:
Brown:
positive power supply
Black:
sensor output
Blue:
GND
Package content:
-
1x DIG3D.LP.M
- 1x DIG-Z.M
(tool heigth sensor)
-
2x cable with the magnetic connector (1m)
- 1x spare tip short
- 1x spare tip long
- 1x M3 tip adapter
(tip is not included)
- 1x M2 tip adapter
(tip is not included)
Documentation:
You will receive the link for download a datasteet and all scripts in the box.
Video of measurement (click on the link to open YouTube video):
Corner measurement/edge finding. Used usually for an origin probing.
Center hole finding
Profile probing
Surface scanning 1
Surface scanning 2